Artikelmaterial aus meinem Zen-Kanal .
Verwenden von TShark zum Analysieren von RTP-Paketen
Im letzten Artikel haben wir eine Fernbedienungsschaltung aus einem Generator und einem Detektor fĂĽr Tonsignale zusammengestellt, deren Kommunikation ĂĽber einen RTP-Stream durchgefĂĽhrt wurde.
RTP-. RTP- .
, RTP, , mstest6.c , , , mstest_common.c, include:
#include <mediastreamer2/msfilter.h>
#include <mediastreamer2/msticker.h>
#include <mediastreamer2/msrtp.h>
#include <ortp/rtpsession.h>
#include <ortp/payloadtype.h>
define PCMU 0
void register_payloads(void)
{
rtp_profile_set_payload (&av_profile, PCMU, &payload_type_pcm8000);
}
static RtpSession *create_rtpsession (int loc_rtp_port, int loc_rtcp_port, bool_t ipv6, RtpSessionMode mode)
{
RtpSession *rtpr; rtpr = rtp_session_new ((int) mode);
rtp_session_set_scheduling_mode (rtpr, 0);
rtp_session_set_blocking_mode (rtpr, 0);
rtp_session_enable_adaptive_jitter_compensation (rtpr, TRUE);
rtp_session_set_symmetric_rtp (rtpr, TRUE);
rtp_session_set_local_addr (rtpr, ipv6 ? "::" : "0.0.0.0", loc_rtp_port, loc_rtcp_port);
rtp_session_signal_connect (rtpr, "timestamp_jump", (RtpCallback) rtp_session_resync, 0);
rtp_session_signal_connect (rtpr, "ssrc_changed", (RtpCallback) rtp_session_resync, 0);
rtp_session_set_ssrc_changed_threshold (rtpr, 0);
rtp_session_set_send_payload_type(rtpr, PCMU);
rtp_session_enable_rtcp (rtpr, FALSE);
return rtpr;
}
:
#include <mediastreamer2/dtmfgen.h>
#include <mediastreamer2/msrtp.h>
#include "mstest_common.c"
int main()
{
ms_init();
MSFilter *voidsource = ms_filter_new(MS_VOID_SOURCE_ID);
MSFilter *dtmfgen = ms_filter_new(MS_DTMF_GEN_ID);
MSFilter *encoder = ms_filter_create_encoder("PCMU");
register_payloads();
RtpSession *tx_rtp_session = create_rtpsession (8010, 8011, FALSE, RTP_SESSION_SENDONLY);
rtp_session_set_remote_addr_and_port(tx_rtp_session,"127.0.0.1", 7010, 7011);
rtp_session_set_send_payload_type(tx_rtp_session, PCMU);
MSFilter *rtpsend = ms_filter_new(MS_RTP_SEND_ID);
ms_filter_call_method(rtpsend, MS_RTP_SEND_SET_SESSION, tx_rtp_session);
MSTicker *ticker_tx = ms_ticker_new();
ms_filter_link(voidsource, 0, dtmfgen, 0);
ms_filter_link(dtmfgen, 0, encoder, 0);
ms_filter_link(encoder, 0, rtpsend, 0);
ms_ticker_attach(ticker_tx, voidsource);
MSDtmfGenCustomTone dtmf_cfg;
dtmf_cfg.tone_name[0] = 0;
dtmf_cfg.duration = 1000;
dtmf_cfg.frequencies[0] = 440;
dtmf_cfg.frequencies[1] = 0;
dtmf_cfg.amplitude = 1.0;
dtmf_cfg.interval = 0.;
dtmf_cfg.repeat_count = 0.;
char key='9';
printf(" , .\n"
" 0.\n");
while(key != '0')
{
key = getchar();
if ((key >= 49) && (key <= 54))
{
printf(" : %c\n", key);
dtmf_cfg.frequencies[0] = 440 + 100*(key-49);
ms_filter_call_method(dtmfgen, MS_DTMF_GEN_PLAY_CUSTOM, (void*)&dtmf_cfg);
}
ms_usleep(20000);
}
}
, :
include <mediastreamer2/mssndcard.h>
include <mediastreamer2/mstonedetector.h>
include <mediastreamer2/msrtp.h>
include <mediastreamer2/mseventqueue.h>
include "mstest_common.c"
static void tone_detected_cb(void *data, MSFilter *f, unsigned int event_id,MSToneDetectorEvent *ev)
{
printf(" : %s\n", ev->tone_name);
}
int main()
{
ms_init();
MSSndCard *card_playback = ms_snd_card_manager_get_default_card(ms_snd_card_manager_get());
MSFilter *snd_card_write = ms_snd_card_create_writer(card_playback);
MSFilter *detector = ms_filter_new(MS_TONE_DETECTOR_ID);
ms_filter_call_method(detector, MS_TONE_DETECTOR_CLEAR_SCANS, 0);
ms_filter_set_notify_callback(detector, (MSFilterNotifyFunc)tone_detected_cb, NULL);
MSToneDetectorDef scan[6]=
{
{"V+",440, 100, 0.1},
{"V-",540, 100, 0.1},
{"C+",640, 100, 0.1},
{"C-",740, 100, 0.1},
{"ON",840, 100, 0.1},
{"OFF", 940, 100, 0.1}
};
int i;
for (i = 0; i < 6; i++)
{
ms_filter_call_method(detector, MS_TONE_DETECTOR_ADD_SCAN, &scan[i]);
}
MSFilter *decoder=ms_filter_create_decoder("PCMU");
register_payloads();
MSFilter *rtprecv = ms_filter_new(MS_RTP_RECV_ID);
RtpSession *rx_rtp_session = create_rtpsession (7010, 7011, FALSE, RTP_SESSION_RECVONLY);
ms_filter_call_method(rtprecv, MS_RTP_RECV_SET_SESSION, rx_rtp_session);
MSTicker *ticker_rx = ms_ticker_new();
ms_filter_link(rtprecv, 0, decoder, 0);
ms_filter_link(decoder, 0, detector, 0);
ms_filter_link(detector, 0, snd_card_write, 0);
ms_ticker_attach(ticker_rx, rtprecv);
char key='9';
printf( " 0.\n");
while(key != '0')
{
key = getchar();
ms_usleep(20000);
}
}
, , . — 1 6 , . . , — RTP- .
, Wireshrk — TShark. TShark , . Wireshark , Wireshark.
Wireshark, . TShark, VoIP , .
TShark :
sudo apt-get install tshark
, :
tshark --version
.
, tshark . loopback ( ), TShark -i lo:
sudo tshark -i lo
(, , ). , , . , , . Ctrl-C (8010): -f "udp port 8010". :
sudo tshark -i lo -f "udp port 8010"
( 10 ):
1 0.000000000 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
2 0.020059705 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
3 0.040044409 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
4 0.060057104 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
5 0.080082311 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
6 0.100597153 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
7 0.120122668 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
8 0.140204789 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
9 0.160719008 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
10 0.180673685 127.0.0.1 → 127.0.0.1 UDP 214 8010 → 7010 Len=172
, , , . , , . :
.
.
IP- IP- .
, UDP, RTP- UDP-.
.
.
, , RTP- 172 , , , UDP- 214 .
UDP-, TShark :
sudo tshark -i lo -f "udp port 8010" -P -V -O rtp -o rtp.heuristic_rtp:TRUE -x
Infolgedessen wird die Ausgabe des Programms angereichert - eine Entschlüsselung des internen Inhalts des Pakets, das es verursacht hat, wird jedem Ereignis hinzugefügt. Um die Ausgabedaten besser anzuzeigen, können Sie TShark entweder durch Drücken von Strg-C stoppen oder die Ausgabe in eine Datei duplizieren, indem Sie dem Startprogramm eine Pipeline mit dem Dateinamen tee <Dateiname> zum Startbefehl hinzufügen:
sudo tshark -i lo -f "udp port 8010" -P -V -O rtp -o rtp.heuristic_rtp:TRUE -x | tee log.txt
Schauen wir uns nun an, was wir in der Datei haben. Hier ist das erste Paket daraus:
1 0.000000000 127.0.0.1 → 127.0.0.1 RTP 214 PT=ITU-T G.711 PCMU, SSRC=0x6B8B4567, Seq=58366, Time=355368720
Frame 1: 214 bytes on wire (1712 bits), 214 bytes captured (1712 bits) on interface 0
Ethernet II, Src: 00:00:00_00:00:00 (00:00:00:00:00:00), Dst: 00:00:00_00:00:00 (00:00:00:00:00:00)
Internet Protocol Version 4, Src: 127.0.0.1, Dst: 127.0.0.1User Datagram Protocol, Src Port: 8010, Dst Port: 7010
Real-Time Transport Protocol [Stream setup by HEUR RT (frame 1)]
[Setup frame: 1]
[Setup Method: HEUR RT]
10.. .... = Version: RFC 1889 Version (2)
..0. .... = Padding: False
...0 .... = Extension: False
.... 0000 = Contributing source identifiers count: 0
0... .... = Marker: False
Payload type: ITU-T G.711 PCMU (0)
Sequence number: 58366 [Extended sequence number: 58366]
Timestamp: 355368720
Synchronization Source identifier: 0x6b8b4567 (1804289383)
Payload: ffffffffffffffffffffffffffffffffffffffffffffffff...
0000 00 00 00 00 00 00 00 00 00 00 00 00 08 00 45 00 ..............E.
0010 00 c8 3c 69 40 00 40 11 ff b9 7f 00 00 01 7f 00 ..<i@.@.........
0020 00 01 1f 4a 1b 62 00 b4 fe c7 80 00 e3 fe 15 2e ...J.b..........
0030 7f 10 6b 8b 45 67 ff ff ff ff ff ff ff ff ff ff ..k.Eg..........
0040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0080 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00a0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00c0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00d0 ff ff ff ff ff ff ......
Wir werden den folgenden Artikel der Analyse der in dieser Auflistung enthaltenen Informationen widmen und unweigerlich ĂĽber die interne Struktur des RTP-Pakets sprechen.